filename: tfs 1226.doc version 1.3 04.02.2014 vectron international filter specification tfs 1226 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: * input: 338 || -1.6 pf output: 338 || -1.6 pf characteristics remark: the maximum attenuation in the passband is defined as the insertion loss . the nominal frequency f n is fixed at 1226.85 mhz without any tolerance or l imit. the values of absolute attenuation a abs are guaranteed for the whole operating temperature range. the frequency shift of the filter in the op erating temperature range is included in the production tol erance scheme. d a t a typ. value tolerance / limit insertion loss a e 4.5 db max. 6.5 db nominal frequency f n - 1226.85 mhz passband passband variation 0.7 db f n max. 1.0 2.0 mhz db absolute attenuation a abs 1000 mhz ... 1205 mhz 39 db min. 35 db 1205 mhz ... 1221 mhz 24 db min. 18 db 1221 mhz ... 1222 mhz 25 db min. 10 db 1232 mhz ... 1333 mhz 25 db min. 10 db 1233 mhz ... 1236 mhz 45 db min. 20 db 1236 mhz ... 1500 mhz 37 db min. 30 db input power level - max. 0 dbm operating temperature range otr - - 31 c ... + 85 c storage temperature range - - 45 c ... + 90 c temperature coefficient of frequency tc f ** - 0.051 ppm/k 2 - *) the terminating impedances depend on parasitics and q-values of matching elements and the board us ed, and are to be understood as reference values only. should there be additio nal questions do not hesitate to ask for an applica tion note or contact our design team. **) ? f c (hz) = tc f (ppm/k 2 ) x (t - t o ) 2 x f t0 (mhz). generated: checked / approved:
filename: tfs 1226.doc version 1.3 04.02.2014 vectron international filter specification tfs 1226 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 50 test circuit c1 l1 saw l2 c 2 1, 3, 4, 6 2 5 1 ground 2 input 3 ground 4 ground 5 output 6 ground date code: year + week e 2014 f 2015 g 2016 ... 1000 1100 1200 1300 1400 1500 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 frequency in mhz magnitude in db 1224.5 1225 1225.5 1226 1226.5 1227 1227.5 1228 1228.5 1229 1229.5 -5 -4.5 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 frequency in mhz magnitude in db c26 e06
filename: tfs 1226.doc version 1.3 04.02.2014 vectron international filter specification tfs 1226 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0.35 mm or g respec tively, 1 octave per min, 10 cycles per plane, 3 planes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 15 min. each / 1 00 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions, see page 4: "air reflo w temperature conditions" 5. esd ansi/esd s20.20-1999 , class 1a for hbm this filter is rohs compliant (2011/65/eu) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 reel (all dimensions in mm) a : 330 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2
filename: tfs 1226.doc version 1.3 04.02.2014 vectron international filter specification tfs 1226 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260 c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 1226.doc version 1.3 04.02.2014 vectron international filter specification tfs 1226 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 - generation of development specification strehl 06.02.2009 1.1 - change otr and construction and pin connectio n s. channaa 23.02.2009 1.2 - add typical values and filter characteristic - generation of filter specification s. channaa 25.11.2009 1.3 - maximum input power updated kortenbeutel 04.02.2014
|
